Products

Sight glass is an inspection glass used to visually monitor liquid or gas flows in machinery and process equipment. Made from durable material, such as borosilicate glass, it can withstand high temperatures and chemicals. Sight glass is used in industry to ensure proper flow and detect anomalies, increasing both safety and efficiency. Available in inline and clamp versions.

C.S.F. Inox S.p.a. offers a wide range of seaming stations for all production needs. This range is versatile and flexible, with piston type seaming machines, available in different sizes and with varying equipment. The machines are manufactured with the highest quality electro-pneumatic components. The whole range is made with a fully AISI 304/EN 1.4301 stainless steel structure. Thanks to the use of pneumatic piston pumps, barrel unloaders can handle a variety of products, from low viscosities to values over 100,000 cP. Fully developed PLC controlled systems that can be easily customized to your application. Work cycles are managed by an electro-pneumatic panel with Siemens PLC.

DEBEM AISIBOXER/SANIBOXER is a hygienically designed air operated diaphragm pump certified for MOCA - ATEX - FDA. All pumps have a patented drive package and are certified to the strictest industry regulations (such as 3A and MOCA) and can undergo the usual washing and cleaning processes (CIP - SIP - COP). The pump has a system that allows the pump to be rotated to be completely drained of liquid in both chambers. The pumps are ideal for handling liquids in sectors such as food and beverage, cosmetics, pharmaceutical and hair care industries. The SANIBOXER version is 3A certified and equipped with sensors to detect diaphragm rupture to avoid contamination during operation.

Unique Albin Pump diaphragm pump with minimal pulsation, available in standard and ATEX versions.

The Albin Pump portfolio has been extended with the KM/KB series, a versatile and cost-effective peristaltic dosing pump for high-precision dosing in water and wastewater treatment.

Small eccentric screw pump for dosing low and high viscosity products, including those containing solid particles. Pulsation-free dosing with high accuracy for all types of liquids in various industries. Pump and gear motor in a close-coupled design makes the unit compact and easy to place. The flow rate can be adjusted via the motor speed with an optional frequency converter.

The MAV series is a vertical progressive cavity pump manufactured in AISI 316 stainless steel, designed for vertical installation with the inlet immersed directly in the product. The progressive cavity pumps are used to transfer product and empty drums or containers. They are suitable for liquids with different properties, including those with low to medium viscosity or containing suspended fibers and solids.

The TBK/TBAK is an evolution of the standard TBH/TBA model where safety requires magnetic operation to handle and secure hazardous fluids. It has the same hydraulic characteristics with its high efficiency at low flows with high pressures. These pumps reach a very low NPSH value making them particularly suitable for pumping liquids close to boiling point and in severe conditions. The special design ensures the pumping of liquids containing gases and in particular liquefied gases.

Magnetic drive single-stage centrifugal pump with closed impeller, sized according to ISO 2858 and ISO 5199 standards and derived from the TCH series. The pump has an innovative design with high quality components.

TCHM and TCTM series of Pompetravaini are of the highest quality with high efficiency and attractive price to chemical industry and industry in general. These robust and reliable pumps are based on the TCH series. They are manufactured in accordance with ISO standards 2858 and 5199. They are available in combination in simple monobloc assembly. Equipped with standard IEC B5 motors, allowing cost savings and better availability. The motors are directly connected to the pump without the need for flexible couplings and require no alignment. Perfect alignment is guaranteed, resulting in lower maintenance costs and longer service life. An integrated shaft bearing in the intermediate section reduces axial and radial loads on the electric motor, resulting in less wear on rotating components and increasing pump reliability and durability. High hydraulic efficiency and effectiveness and low NPSH requirements. The impeller can be of a closed (TCHM) or Vortex (TCTM) type allowing pumping of clean or contaminated fluids, giving wide use of these pumps. Handling of clean or contaminated liquids in chemical, petrochemical, pharmaceutical, food, pulp and paper and general industries.

Centrifugal pump with open vortex impeller. Suitable for handling liquids with suspended solids or fibers as well as muddy and viscous media. The impeller is of the internal vortex type. The liquid is handled by means of the vortex motion created by the impeller which does not come into direct contact with the pumped liquid. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

The TCA is a chemical centrifugal pump with a fully open impeller, designed for handling abrasive liquids as well as suspensions and solids. The impeller rotates between two wear plates, front and rear, which can be easily replaced in case of prolonged wear. The special four-blade hydraulic profile offers high hydraulic efficiency and low NPSH requirements. The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

ITT latest generation diaphragm valves set a whole new standard in the market in single UH and low cost over time

Diaphragm valves from ITT for pharmaceutical & biotech applications

Electric Proportional Pinch Valves for effective flow control.

Choose from our standard range or design your own bottle, cap and tubing to suit your specific needs in bioprocessing and single-use systems.