Skip to content
TCT series
Centrifugal pumps

TCT series - Chemical norm centrifugal pumps with vortex impellers ISO 2858

Centrifugal pump with open vortex impeller. Suitable for handling liquids with suspended solids or fibers as well as muddy and viscous media.

The impeller is of the internal vortex type. The liquid is handled by means of the vortex motion created by the impeller which does not come into direct contact with the pumped liquid.

The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced.

The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored.

Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs.

The dimensions are compatible with ISO 2858/DIN 24256 and are identical to the pumps in TCH.

Pump and seal housings can be fitted with heating or cooling jackets as required.

From the TCH series are derived the TCT series - Vortex pumps, the TCA series - with open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components.

Units up to 30 kW can be short-coupled, with the addition of a lantern piece to motors with B5 flange. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

Pompetravaini
Request offer
Product Overview
Specifications
  • Flows up to 250 m3/h and pressures up to 7 bar.
  • Temperature ranges -40 °C ÷ +260 °C depending on pressure and material selection.
  • Materials: Wetted parts are available in various combinations, Cast Iron, Ductile Iron, AISI 316/ ASTM - CF8M, ASTM-CN7M, Incoloy 825, Hastelloy C. (Special materials on request).
  • Mechanical shaft seals, internally assembled in a range of material combinations according to (ISO 3069 / UNI EN 12756).
  • The connections are flanged with the UNI2223-2229 PN16 standard.
  • A range of options are available: ATEX version etc.
Spare parts/service
Are you in need of spare parts?

We have a large selection of wear parts for most brands of pumps and valves for hygienic applications.

Find out more about our spare parts

Does your pump need service or maintenance?

We offer service and maintenance of pumps to ensure optimal performance and lifetime. Send your pump to us - we'll make sure it works properly.

Find out more about our pump service

Downloadable material
tch-tct-tca-tcd series
Brochure
-
Swedish

Related products

Varisco Self-priming pumps
Centrifugal pumps

J Series - Self-priming centrifugal pump

Self-priming centrifugal pump for applications in process, water/sewage treatment plants, fire/rescue authorities, municipalities, infrastructure/construction, etc. Available in several versions, both as a compact pump directly connected to the motor and as a stand-alone pump with base plate, shaft coupling and B3 motor.
Varisco
Self-priming centrifugal pumps ST-R series
Centrifugal pumps

STR series - Self-priming heavy duty centrifugal pump

Self-priming Heavy-Duty centrifugal pump for applications mainly in water/sewage treatment plants where there are requirements for high flows, materials and availability. The STR series is suitable for heavily contaminated liquids in sewage and treatment plants with a content of fibers, cellulose material and other abrasive particles.
Varisco
TCA series
Centrifugal pumps

TCA series - Chemical norm centrifugal pumps open impeller ISO 2858

The TCA is a chemical centrifugal pump with a fully open impeller, designed for handling abrasive liquids as well as suspensions and solids. The impeller rotates between two wear plates, front and rear, which can be easily replaced in case of prolonged wear. The special four-blade hydraulic profile offers high hydraulic efficiency and low NPSH requirements. The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.
Pompetravaini
TCD series
Centrifugal pumps

TCD series - Chemical norm centrifugal pumps for high temperatures ISO 2858

TCD centrifugal pump for thermal oil. The TCD pump series is specially designed to handle thermal fluids up to 320˚C without special cooling systems. In the active cooling version "XT" it is possible to pump diathermic fluids up to a temperature of 365 °C. A special thermal barrier chamber, located between the pump casing and the impeller, blocks the heat from the pumped product. The designers have designed the bearing with cooling fins to effectively dissipate the heat from the pump casing. This design allows the safe use of a standard, simple mechanical seal. The pump shaft is supported by oversized C3 series ball bearings and is oil lubricated. The pump casing and impeller are the same as the other pumps in the two smallest models of the TCH series. Pump dimensions and characteristics are in accordance with ISO 2858/DIN 24256 and are the same as for the corresponding TCH series models. The TCD/SP pump range has been specifically designed to handle vegetable oils. The design varies from the standard TCD series at the mechanical seal; An additional chamber has been added behind the mechanical seal. This chamber should be connected to a container containing oil compatible with the pumped liquid. This device avoids that in case of seal failure, the air can enter the pump and oxidize the oil or that oil from the bearing housing enters the pump housing or vice versa.
Pompetravaini

Do you have questions about pumps or want to place an order?

"*"indicates required fields

Terms and conditions*

Do you want to find contact details for a specific person or office?

Here you will find all our contact details.

Find a team member Our offices

With Colly Flowtech you always get

Service

Local presence

We have offices in ten locations across Sweden, from Lund in the south to Skellefteå in the north. We also have an office in Denmark.

A supplier you can trust

With a customer rating of 4.45 out of 5 and strong NPS results, we have clear evidence that our customers appreciate our dedication, our personalized service, and our focus on quality.

Unique product range

Unique product range

At Colly Flowtech, we offer a unique product breadth in flow technology, with solutions customized for different sectors and industries.

Customers

40+ years of experience

With over 40 years of industry experience, we work in close collaboration with our customers and with a strong commitment.