Products

Our hygienic SMS fittings are used in the pharmaceutical, food industry etc.

Our equilateral t-tubes are used in the pharmaceutical, food industry etc.

Our hygienic stainless steel pipes DIN are used in the pharmaceutical, food industry etc.

Hygienic stainless steel pipe according to ASME BPE standard. Used in the pharmaceutical, food, cosmetics and chemical-technical industries where high demands are placed on hygiene and quality. Available with internal surface roughness of Ra 0.51 µm (SF1) or Ra 0,38 µm (sF4).

Hygienic stainless steel pipe according to OD standard. Used in the pharmaceutical, food, cosmetics and chemical-technical industries where high demands are placed on hygiene and quality.

Our hygienic stainless steel pipes ISO1127 are used in the pharmaceutical, food industry etc.

Our hygienic stainless steel pipes SMS are used in pharmaceutical, food industry etc.

Our square tubes are available in both 304 and 316L

Wide range of user-friendly and hygienic in-line filters for food and pharmaceutical processes.

Pipe holder in classic design with Allen screw and with pipes in 90 or 150 mm length

TCD centrifugal pump for thermal oil. The TCD pump series is specially designed to handle thermal fluids up to 320˚C without special cooling systems. In the active cooling version "XT" it is possible to pump diathermic fluids up to a temperature of 365 °C. A special thermal barrier chamber, located between the pump casing and the impeller, blocks the heat from the pumped product. The designers have designed the bearing with cooling fins to effectively dissipate the heat from the pump casing. This design allows the safe use of a standard, simple mechanical seal. The pump shaft is supported by oversized C3 series ball bearings and is oil lubricated. The pump casing and impeller are the same as the other pumps in the two smallest models of the TCH series. Pump dimensions and characteristics are in accordance with ISO 2858/DIN 24256 and are the same as for the corresponding TCH series models. The TCD/SP pump range has been specifically designed to handle vegetable oils. The design varies from the standard TCD series at the mechanical seal; An additional chamber has been added behind the mechanical seal. This chamber should be connected to a container containing oil compatible with the pumped liquid. This device avoids that in case of seal failure, the air can enter the pump and oxidize the oil or that oil from the bearing housing enters the pump housing or vice versa.

Short-coupled aseptic centrifugal pump with open impeller. The CSD pumps are provided with vapor barrier between product and atmosphere to ensure product integrity. It is composed of two different flushing systems: one with very high temperature water for the mechanical seal and the other is steam on the product pump connections. Short-circuited with IEC motor. Balanced, internally mounted, protected mechanical shaft seal with rotation protection. Documentation, certificates and tests facilitate validation/qualification for the pharmaceutical industry.

Hygienic stainless steel bend in 90° according to DIN standard is used in the pharmaceutical, food, cosmetics and chemical industries where high demands are placed on hygiene and quality. Available with internal surface roughness of Ra 0.8. Lower Ra values are available on request. All sizes in the table below are in mm. 

Hygienic stainless steel bend in 45° according to DIN standard is used in the pharmaceutical, food, cosmetics and chemical industries where high demands are placed on hygiene and quality. Available with internal surface roughness of Ra 0.8. Lower Ra values are available on request. All sizes in the table below are in mm. 

For safe and convenient emptying of drums and containers, we also offer a manual hand pump in a complete range. Hand pumps are pumps that are operated manually. Depending on the medium, different materials for the pump and seals are available. In principle, hand pumps can be divided into three groups: for mineral oil products, for chemicals/cleaning solutions and flammable media such as gasoline or solvents. The illustrated hand pumps can be used for 200 liter drums and smaller containers. However, if you ever need to remove small amounts of media from an IBC, we can extend the suction pipe on several of our hand pumps up to 1200 mm.

Colly Flowtech can offer complete, customized vacuum/compressor systems from Pompetravaini