Pumps for the mining industry

ATEX classified aluminum diaphragm pump from Dominator Pump. Available in models P30A and P31A.

Plastic diaphragm pump from Dominator Pump. Available in models P15P/D, P16P/D and T15P/D.

Diaphragm pump in hygienic design in SS316L from Dominator Pump. Model P48S.

ATEX-rated acid-proof steel diaphragm pump with hygienic design. Available in models P30S, P31S, P38S and P39S.

ATEX-rated acid-proof steel diaphragm pump with hygienic design. Available in models P10S, P11S, P18S and P19S.

The new Rockstar is based on a brand new innovative center section that makes servicing and maintenance easier than ever and provides exceptional air savings and capacity vs air consumption. Ideal for extremely tough abrasive products thanks to its flap valve design. Made of chemical resistant polypropylene plastic making it suitable for a wide range of media where even particles, suspensions etc. can be handled due to the flap valve design. High chemical resistance.

The new Valor series is based on a brand new innovative center section that makes servicing and maintenance easier than ever and provides exceptional air savings and capacity vs air consumption. Ideal for a wide range of markets and applications. Valor has patented newly developed air motor design with combined air motor/pilot valve. Class-leading low air consumption reduces operating costs. It also features patented valve ball control that contributes to increased efficiency.

The Albin Pump portfolio has been extended with the KM/KB series, a versatile and cost-effective peristaltic dosing pump for high-precision dosing in water and wastewater treatment.

Small eccentric screw pump for dosing low and high viscosity products, including those containing solid particles. Pulsation-free dosing with high accuracy for all types of liquids in various industries. Pump and gear motor in a close-coupled design makes the unit compact and easy to place. The flow rate can be adjusted via the motor speed with an optional frequency converter.

The MAV series is a vertical progressive cavity pump manufactured in AISI 316 stainless steel, designed for vertical installation with the inlet immersed directly in the product. The progressive cavity pumps are used to transfer product and empty drums or containers. They are suitable for liquids with different properties, including those with low to medium viscosity or containing suspended fibers and solids.

The TBK/TBAK is an evolution of the standard TBH/TBA model where safety requires magnetic operation to handle and secure hazardous fluids. It has the same hydraulic characteristics with its high efficiency at low flows with high pressures. These pumps reach a very low NPSH value making them particularly suitable for pumping liquids close to boiling point and in severe conditions. The special design ensures the pumping of liquids containing gases and in particular liquefied gases.

Magnetic drive single-stage centrifugal pump with closed impeller, sized according to ISO 2858 and ISO 5199 standards and derived from the TCH series. The pump has an innovative design with high quality components.

TCHM and TCTM series of Pompetravaini are of the highest quality with high efficiency and attractive price to chemical industry and industry in general. These robust and reliable pumps are based on the TCH series. They are manufactured in accordance with ISO standards 2858 and 5199. They are available in combination in simple monobloc assembly. Equipped with standard IEC B5 motors, allowing cost savings and better availability. The motors are directly connected to the pump without the need for flexible couplings and require no alignment. Perfect alignment is guaranteed, resulting in lower maintenance costs and longer service life. An integrated shaft bearing in the intermediate section reduces axial and radial loads on the electric motor, resulting in less wear on rotating components and increasing pump reliability and durability. High hydraulic efficiency and effectiveness and low NPSH requirements. The impeller can be of a closed (TCHM) or Vortex (TCTM) type allowing pumping of clean or contaminated fluids, giving wide use of these pumps. Handling of clean or contaminated liquids in chemical, petrochemical, pharmaceutical, food, pulp and paper and general industries.

Centrifugal pump with open vortex impeller. Suitable for handling liquids with suspended solids or fibers as well as muddy and viscous media. The impeller is of the internal vortex type. The liquid is handled by means of the vortex motion created by the impeller which does not come into direct contact with the pumped liquid. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

The TCA is a chemical centrifugal pump with a fully open impeller, designed for handling abrasive liquids as well as suspensions and solids. The impeller rotates between two wear plates, front and rear, which can be easily replaced in case of prolonged wear. The special four-blade hydraulic profile offers high hydraulic efficiency and low NPSH requirements. The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

Petrochemical Duty (PD series) is a gear pump designed for applications in the refinery and petrochemical industry, developed to meet the requirements of API 676 (2nd edition). All pumps are hydrostatically and dynamically tested at the factory and have their own test certificate and can be supplied on request NDT test, Welding, Painting, 3.1B certificate etc.