Process pumps

The TCA is a chemical centrifugal pump with a fully open impeller, designed for handling abrasive liquids as well as suspensions and solids. The impeller rotates between two wear plates, front and rear, which can be easily replaced in case of prolonged wear. The special four-blade hydraulic profile offers high hydraulic efficiency and low NPSH requirements. The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

Petrochemical Duty (PD series) is a gear pump designed for applications in the refinery and petrochemical industry, developed to meet the requirements of API 676 (2nd edition). All pumps are hydrostatically and dynamically tested at the factory and have their own test certificate and can be supplied on request NDT test, Welding, Painting, 3.1B certificate etc.

The CD (Chemical Duty) series gear pump is made of acid-proof steel for tough, corrosive applications in the chemical, food and pharmaceutical industries.

Compact gear pump with cast iron IEC motor and good suction capacity. Heavy duty construction with standard seals according to EN12756.

The Albin Pump ALHP inline pulsation damper reduces vibration and fluid hammer in your pipelines, thereby increasing hose life. The pulsation is created by the working principle of the peristaltic pump. The rubber hose in the pulsation damper adjusts its volume to compensate for the pulsation and provide a smooth flow to the outlet line. This is done by means of a thick-walled, reinforced rubber hose mounted in a cylindrical carbon steel pressure vessel. The hose is surrounded by compressed air (nitrogen if ATEX equipped).

Hose pump developed to handle large flows of highly viscous and abrasive liquids. ALX is definitely a competitor to the slurry centrifugal pump.

The Albin Pump has developed a patented solution to meet the requirements of the food, cosmetics and pharmaceutical industries. The pump has a unique design that allows the hose to be released from the pressure jaws. This allows efficient cleaning with external CIP systems without the need to rotate the pump.

Newly developed hose pump in series production for a wide range of applications in areas such as food, pharmaceuticals and biotech, chemistry and surface treatment.

Drum pumps for high viscosity media.

Drum pump for diesel, fuel oil, hydraulic oil, lubricating oil and engine oil, glycol, etc. With electric motors 220V or air motors with piping in aluminum or polypropylene. Motors and piping are suitable for Lutz®. All electric motors are supplied with built-in switch, overload protection, 5 m electrical cable with electrical plug. They can be supplied with or without low voltage protection and as an option with speed regulator for variable flow.

Drum pumps for alcohol, gasoline, petroleum, acetone and other chemicals.

Eccentric screw pump in series design for demanding applications in the process industry. With efficient product handling, these pumps are ideal for use in pulp and paper, chemical, sludge handling and other harsh environments.

This progressive cavity pump is part of a hygienic range adapted for the food and pharmaceutical industries. It offers gentle product handling and is ideal for applications in the food, brewing, cosmetics and pharmaceutical industries.

The TRA-20 series is a heavy-duty pump developed for demanding applications in the process, food and pharmaceutical industries.

The TRA 10 series is a robust and reliable all-round pump for demanding applications in all types of industries.

Aceptic lobe rotor pump for high hygienic requirements where availability and reliability are important.